How To Flash Xiaomi Mi Note Bamboo Global Rom Using MiFlashtool - For you Xiaomi Mi Note Bamboo smartphone users of course very confident because the design and capabilities of this smartphone is no doubt. Carrying out the present concept with full features and luxury. Various top-class technologies are increasingly being developed by Xiaomi vendors.
In terms of hardware and software quality, including GPU, Processor, RAM, Camera, Graphics, battery power resistance, finger print, responsive screen and classy CPU with top-level speed that is increasingly growing.
It is different from the easy way of flashing through the Updater menu when the devices are normal (it can turn on and enter the system), here what I will explain is how to do flashing with the fastboot via MiFlashtool method. You can also use this method to overcome your Xiaomi Mi Note Bamboo bootloop when you have not had time to backup the file system via CWM Recovery or even when you cannot access recovery mode again.
In addition to dealing with bootloop, you can also use this method for Xiaomi Mi Note Bamboo users with a Chinese ROM base and want to get or move to the global Miui ROM. As we know that the distributor's products do not have similarities in insurance, after-sales and warranty services.
Almost the same as the way of flashing Android using the fastboot method with other Androids in general. What distinguishes only the OS firmware that you will use.
Before doing the flashing process, make sure the conditions below are complete :
- Windows-based PC / Laptop
- Installed Fastboot driver
- Already downloaded and installed MiFlashtool
- USB Cable Data
- Minimum battery power of 50%
If everything is complete please download and extract the Global stable fastboot Xiaomi Mi Note Bamboo Pro miui below :
Note that the downloaded file must be in the .tgz format, if the download is in the .gz format, please rename the format to .tgz. Because this will affect the success of the extract and flashing file.
Continue to the next step, make sure the extract has several complete files and folders. More or less like the picture below.
How to Flash Xiaomi Mi note Bamboo MIUI Global via Fastboot (MiFlashtool)
The next step please turn off your Xiaomi Mi Note Bamboo and enter fast boot mode by pressing the "power button + Volume down", then connect to the PC / laptop with USB. Then open the MiFlashtool application then click "refresh" on the top right button and make sure it is detected perfectly as shown below.
Then click select and find where your Xiaomi Mi Note Bamboo extract folder was. Remember, just click the folder, don't fill the folder. and the lower right of the MiFlashtool checklist or mark clean all.
This is intended so that after the flashing process is complete, the android will be clean like the first time you bought it. So for the sake of security, please backup your important files before doing flashing.
See the destination folder image like this below :
ow everything is ready, the last step click "flash" on the top right button and wait for the flashing process to run until it's finished. When everything is finished, please turn on your Xiaomi Mi Note Bamboo and wait for the boot process to finish. Usually this will take quite a long time.
If you have done it, please recalibrate the battery so that the system can read the capacity and remaining battery power normally after flashing.
Note that this method can only be used for flashing or upgrading. If you want to downgrade, please Unlock the Bootloader first to succeed
That is the tutorial this time about How To Flash Xiaomi Mi Note Bamboo Global Rom Using MiFlashtool, if you have any difficulties, don't hesitate to contact us or just leave a comment below. That's all, thank you and hopefully useful.
EmoticonEmoticon